a21deba9ae3101df82bfcbd9b28d2867

Микросхема MAX192BCWP+, АЦП, низкой мощности, 10 бит, 133 Квыборок/с …

Поставка электронных компонентов в Челябинск

1.274,00 руб.

x 1.274,00 = 1.274,00
Сроки поставки выбранного компонента в Челябинск уточняйте у нашего менеджера
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №110-12 дней1.274,00руб.1.184,82руб.1.121,12руб.1.082,90руб.1.044,68руб.1.025,57руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №27-10 дней1.439,62руб.1.299,48руб.1.274,00руб.1.223,04руб.1.184,82руб.1.159,34руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №37-10 дней1.554,28руб.1.401,40руб.1.363,18руб.1.324,96руб.1.248,52руб.1.172,08руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №47-10 дней1.516,06руб.1.363,18руб.1.337,70руб.1.286,74руб.1.235,78руб.1.165,71руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №55 дней2.165,80руб.1.949,22руб.1.911,00руб.1.834,56руб.1.770,86руб.1.617,98руб.
НаличиеСрок1шт10шт50шт100шт1000шт3000шт
Склад №66 дней2.153,06руб.1.936,48руб.1.895,71руб.1.821,82руб.1.758,12руб.1.605,24руб.

Характеристики

MAX192BCWP+, АЦП, низкой мощности, 10 бит, 133 Квыборок/с …The MAX192BCWP+ is a low power, 8-channel, serial 10bit ADC in 20 pin WSOIC package. It is a low cost, 10bit data acquisition system that combines an 8-channel multiplexer, high bandwidth track/hold and serial interface with high conversion speed and ultra low power consumption. The analogue inputs are software configurable for single ended and differential (unipolar/bipolar) operation. The 4 wire serial interface connects directly to SPI, QSPI and Microwire devices without using external logic. A serial strobe output allows direct connection to TMS320 family digital signal processors. The MAX192 uses either the internal clock or an external serial interface clock to perform successive approximation A/D conversions. The serial interface can operate beyond 4MHz when the internal clock is used. The MAX192 has an internal 4.096V reference with a drift of ±30ppm typical. A reference buffer amplifier simplifies gain trim and two sub-LSBs reduce quantization errors.

• Supply voltage range is 4.75V to 5.25V
• Operating temperature range from 0°C to 70°C
• 8-channel single ended or 4-channel differential inputs
• Low power consumption of 1.5mA (operating) and 2µA (power-down)
• Internal track/hold circuitry and sampling rate is 133KHz
• Relative accuracy is ±1LSB