2c663880cf495bfdf48cd4a278413e57

Микросхема LT1054CS8#PBF, DC-DC преобразователь Switched Capacitor …

Поставка электронных компонентов в Челябинск

725,20 руб.

x 725,20 = 725,20
Сроки поставки выбранного компонента в Челябинск уточняйте у нашего менеджера
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №110-12 дней725,20руб.674,44руб.652,68руб.638,18руб.616,42руб.580,16руб.565,66руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №25-7 дней1.363,38руб.1.254,60руб.1.232,84руб.1.203,83руб.1.160,32руб.1.095,05руб.1.066,04руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №35-7 дней1.385,13руб.1.276,35руб.1.247,34руб.1.218,34руб.1.160,32руб.1.102,30руб.1.080,55руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №410 дней870,24руб.797,72руб.783,22руб.761,46руб.739,70руб.696,19руб.674,44руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №57 дней1.261,85руб.1.160,32руб.1.131,31руб.1.109,56руб.1.073,30руб.1.008,03руб.979,02руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №610-12 дней790,47руб.732,45руб.710,70руб.696,19руб.674,44руб.630,92руб.616,42руб.

Характеристики

LT1054CS8#PBF, DC-DC преобразователь Switched Capacitor …The LT1054CS8#PBF is a Switched-capacitor Voltage Converter and Regulator provides higher output current than previously available converters with significantly lower voltage losses. An adaptive switch driver scheme optimizes efficiency over a wide range of output currents. Total voltage loss at 100mA output current is typically 1.1V. This holds true over the full supply voltage range of 3.5 to 15V. Quiescent current is typically 2.5mA. The LT1054 also provides regulation, a feature not previously available in switched-capacitor voltage converters. By adding an external resistive divider a regulated output can be obtained. This output will be regulated against changes in both input voltage and output current. It can also be shut down by grounding the feedback pin. Supply current in shutdown is less than 100µA. The internal oscillator runs at a nominal frequency of 25kHz. The oscillator pin can be used to adjust the switching frequency or to externally synchronize the LT1054.

• Reference and error amplifier for regulation
• Low loss (1.1V at 100mA)
• External shutdown
• External oscillator synchronization
• Pin compatible with the LTC®1044/ICL7660