c4ea3738e42c10a663017c0028cecbd2

Микросхема AT89C5131A-RDTUM, MCU, 8BIT, 80C52X2, 48MHZ, VQFP-64

Поставка электронных компонентов в Челябинск

505,68 руб.

x 505,68 = 505,68
Сроки поставки выбранного компонента в Челябинск уточняйте у нашего менеджера
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №110-12 дней505,68руб.470,28руб.455,11руб.445,00руб.429,83руб.404,54руб.394,43руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №25-7 дней950,68руб.874,83руб.859,66руб.839,43руб.809,09руб.763,58руб.743,35руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №35-7 дней965,85руб.890,00руб.869,77руб.849,54руб.809,09руб.768,63руб.753,46руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №410 дней606,82руб.556,25руб.546,13руб.530,96руб.515,79руб.485,45руб.470,28руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №57 дней879,88руб.809,09руб.788,86руб.773,69руб.748,41руб.702,90руб.682,67руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт
Склад №610-12 дней551,19руб.510,74руб.495,57руб.485,45руб.470,28руб.439,94руб.429,83руб.

Характеристики

AT89C5131A-RDTUM, MCU, 8BIT, 80C52X2, 48MHZ, VQFP-64The AT89C5131A-RDTUM is a 1-chip 8-bit high-performance flash version of the 80C51 Microcontroller with full-speed USB functions. This device retains the features of the Atmel 80C52 and adds 1024 bytes of on-chip expanded ERAM, dual data pointer, 16-bit up/down timer, programmable counter array, up to four programmable LED current sources, programmable hardware watchdog and power-on reset. Two software-selectable modes of reduced activity further reduce power consumption. In the idle mode the CPU is frozen while the timers, serial ports and interrupt system operate. In the power-down mode the RAM is saved and the peripheral clock is frozen, but the device has full wake-up capability through USB events or external interrupts.

• 80C52X2 Core (6 clocks per instruction)
• 16/32kB On-chip flash EEPROM in-system programming through USB
• 3kB Flash EEPROM for bootloader
• 1kB EEPROM data — Byte and page (128 bytes) erase and write
• 1024-byte On-chip expanded RAM (ERAM)
• Integrated power monitor (POR/PFD) to supervise internal power supply
• USB 1.1 and 2.0 Full speed compliant module with interrupt on transfer completion
• 100ms to 3s at 8MHz Programmable hardware watchdog timer (one-time enabled with reset-out)
• Keyboard interrupt interface on port P1 (8 bits)
• 400kBps TWI (Two Wire Interface)
• SPI interface (master/slave mode)
• 34 I/O pins
• 4 Direct-drive LED outputs with programmable current sources (2-6-10mA typical)
• 4-level Priority interrupt system (11 sources)
• Idle and power-down modes
• 0 to 24MHz On-chip oscillator with analogue PLL for 48MHz synthesis
• Industrial temperature range