5372fd207e5e4d856bc6cdb65b433589

Микросхема TL594CN, Импульсный регулятор напряжения [DIP-16]

Поставка электронных компонентов в Челябинск

38,22 руб.

x 38,22 = 38,22
Сроки поставки выбранного компонента в Челябинск уточняйте у нашего менеджера
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №110-12 дней38,22руб.35,54руб.34,40руб.33,63руб.31,34руб.30,58руб.29,81руб.27,52руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №25-7 дней69,18руб.63,45руб.62,30руб.60,77руб.56,57руб.55,42руб.53,89руб.48,54руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №35 дней89,43руб.82,56руб.80,64руб.78,73руб.73,38руб.71,47руб.69,94руб.62,68руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №47-10 дней45,86руб.42,04руб.41,28руб.40,13руб.37,46руб.36,69руб.35,54руб.32,10руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №55 дней88,29руб.81,41руб.79,50руб.77,59руб.75,29руб.72,62руб.68,80руб.61,92руб.

Характеристики

TL594CN, Импульсный регулятор напряжения [DIP-16]The TL594CN is a Pulse-Width-Modulation (PWM) Control Circuit designed primarily for power-supply control and this device offers the systems engineer the flexibility to tailor the power-supply control circuitry to a specific application. The DTC comparator has a fixed offset that provides approximately 5% dead time. The on-chip oscillator can be bypassed by terminating RT to the reference output and providing a saw-tooth input to CT or it can be used to drive the common circuitry in synchronous multiple-rail power supplies. The uncommitted output transistors provide either common-emitter or emitter-follower output capability. Each device provides for push-pull or single-ended output operation, with selection by means of the output-control function. The architecture of this device prohibits the possibility of either output being pulsed twice during push-pull operation. The under-voltage lockout control circuit locks the outputs OFF until the internal circuitry is operational.

• Complete PWM power-control circuitry
• Uncommitted outputs for 200mA sink or source current
• Output control selects single-ended or push-pull operation
• Internal circuitry prohibits double pulse at either output
• Variable dead time provides control over total range
• Internal regulator provides a stable 5V reference supply trimmed to 1%
• Circuit architecture allows easy synchronization
• Under-voltage lockout for low-VCC conditions
• Pb-free product