Микросхема TPS54560DDA

Характеристики

TPS54560DDAThe TPS54560DDA is an adjustable output step down DC to DC converter with Eco-Mode in 8 pin SO PowerPAD package. This step down regulator integrates a 92mohm high side MOSFET. The device survives load dump pulses up to 65V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no load supply current to 146µA. Shutdown supply current is reduced to 2µA when the enable pin is pulled low. Undervoltage lockout is internally set at 4.3V but can be increased using enable pin. The output voltage start up ramp is internally controlled to provide a controlled start up and eliminate overshoot. A wide switching frequency range allows either efficiency or external component size to be optimized. Output current is limited cycle by cycle. Frequency foldback and thermal shutdown protects internal and external components during an overload condition. The TPS54560DDA is supported by WEBENCH software tool.

• Supply input voltage range from 4.5V to 60V
• Output voltage range from 0.8V to 58.8V
• 5A output current
• 100KHz to 2.5MHz fixed switching frequency
• High efficiency at light loads with pulse skipping Eco-mode
• Synchronizes to external clock
• Low dropout at light loads with integrated BOOT recharge FET
• Adjustable UVLO voltage and hysteresis
• Operating temperature range -40°C to 125°C
• 0.8V, 1% internal voltage reference

Микросхемы / Микросхемы управления питанием / Импульсные преобразователи
Корпус: 8-SO PowerPad, инфо: IC REG BUCK ADJ 5A 8SOPWRPAD